|
Menu
|
The GS 1930 DC narrow track lift is suitable for indoor use thanks to its dual-zone control system, quiet operation, zero emissions and non-marking tyres, among other features.
GS 1930 DC electric scissor lift for outdoor and indoor construction, maintenance and installation work on flat ground and in confined spaces.
For many people, the use of electric vehicles and machinery is a matter of principle, but for scissor lifts it is more of a practical issue. Electric machines can be operated with minimal emissions, making them ideal for use in confined spaces.
As an additional consideration, electric machines also have lower noise emissions, so they do not generate as much noise as diesel machines in enclosed spaces. This also makes them suitable for indoor building maintenance tasks, whether in department stores, trade fairs, sports halls or even in large health care facilities.
Their advantage is that they are not tied to proximity to the electricity grid or battery life, due to the diesel power source.
Interiors are always a challenge; passage from outside to inside, doors, lifts, narrow working spaces are often a problem during construction and maintenance work. To overcome these problems, the narrow-track, highly manoeuvrable Genie electric scissor-type work platforms sold and/or rented by mateco are the solution.
The GS 1930 DC self-propelled scissor lift with 0.91 m extension increases the working height to 7.60 m.
The two front wheels are driven by the engine and the two rear wheels have disc brakes, making the lift very manoeuvrable in tight spaces.
The Genie GS 1930 DC battery-powered scissor lift is capable of producing the safe maximum speed of 4km/h even with a raised platform, while the speed limit is 0.8km/h under load.
Since it is only 0.76 m wide and 1.83 m high when folded, it has no problem going from floor to floor and simply rolls into the lift. All this, combined with efficient use of battery life and low maintenance costs, allows you to maximise productivity.
Indoor use is also supported by non-marking, solid tyres, which support walking and working on delicate, demanding floor surfaces, even those designed with exclusive materials.
The available E-drive configuration offers increased uptime, lower maintenance costs and industry-leading performance.
We have collected the shift data for the Genie GS 1930 DC electric self-propelled scissor lift. If there is data you need but don’t see it in the specifications, please contact us!
Working height: 7.79 metres
Platform height: 5.79 metres
Load capacity with operator: 227 kg
Basket only: 113 kg
Extension only: 113 kg
Maximum occupancy: 2 person
Platform extensibility: 0.91 metres
Maximum platform length: 2.54 metres
Platform width: 0.74 metres
Platform length: 1.63 metres
Overall Width: 0.76 metres
Machine length for delivery: 1,83 metres
Overall Height (with rails down): 1.80 metres
Overall Height (with rails): 2.11 metres
Overall Weight: 1476 kg / may vary depending on equipment
Gradeability: 25%
Wheelbase: 1.32 metres
Ground Clearence: 0.08 metres
Power: battery
Turning radius / external: 1.55 metres
Tyres: non-marking
Use: indoor
Get a quote for a machine rental in just 2 minutes! Our colleagues will contact you within 1 working day!