Search

|

GS 1930 DC

The GS 1930 DC narrow track lift is suitable for indoor use thanks to its dual-zone control system, quiet operation, zero emissions and non-marking tyres, among other features.

Purely electrical machine!

GS 1930 DC electric scissor lift for outdoor and indoor construction, maintenance and installation work on flat ground and in confined spaces.

General characteristics of electric scissor lifts

For many people, the use of electric vehicles and machinery is a matter of principle, but for scissor lifts it is more of a practical issue. Electric machines can be operated with minimal emissions, making them ideal for use in confined spaces.

As an additional consideration, electric machines also have lower noise emissions, so they do not generate as much noise as diesel machines in enclosed spaces. This also makes them suitable for indoor building maintenance tasks, whether in department stores, trade fairs, sports halls or even in large health care facilities.

 

In contrast, diesel machines are more suited to working outdoors

Their advantage is that they are not tied to proximity to the electricity grid or battery life, due to the diesel power source.

  • These machines have been specifically designed to provide stability for those working in the lift truck in the most varied terrain.
  • Their load capacity is also different from their electric counterparts, as they can carry more loads at a slightly higher maximum height.
  • However, they are also more heavily equipped with safety features, as the higher working area increases the risk of injury.

Benefits of using

Interiors are always a challenge; passage from outside to inside, doors, lifts, narrow working spaces are often a problem during construction and maintenance work. To overcome these problems, the narrow-track, highly manoeuvrable Genie electric scissor-type work platforms sold and/or rented by mateco are the solution.

  • 1.

    The GS 1930 DC self-propelled scissor lift with 0.91 m extension increases the working height to 7.60 m.

  • 2.

    The two front wheels are driven by the engine and the two rear wheels have disc brakes, making the lift very manoeuvrable in tight spaces.

  • 3.

    The Genie GS 1930 DC battery-powered scissor lift is capable of producing the safe maximum speed of 4km/h even with a raised platform, while the speed limit is 0.8km/h under load.

  • 4.

    Since it is only 0.76 m wide and 1.83 m high when folded, it has no problem going from floor to floor and simply rolls into the lift. All this, combined with efficient use of battery life and low maintenance costs, allows you to maximise productivity.

  • 5.

    Indoor use is also supported by non-marking, solid tyres, which support walking and working on delicate, demanding floor surfaces, even those designed with exclusive materials.

  • 6.

    The available E-drive configuration offers increased uptime, lower maintenance costs and industry-leading performance.

Tank capacity

  • The battery provides 24V DC and 225Ah of power.
  • Maximum tank capacity required to operate the hydraulics: 14.2 litres

Technical data

We have collected the shift data for the Genie GS 1930 DC electric self-propelled scissor lift. If there is data you need but don’t see it in the specifications, please contact us!

Working height: 7.79 metres

Platform height: 5.79 metres

Load capacity with operator: 227 kg

Basket only: 113 kg

Extension only: 113 kg

Maximum occupancy: 2 person

Platform extensibility: 0.91 metres

Maximum platform length: 2.54 metres

Platform width: 0.74 metres

Platform length: 1.63 metres

Overall Width: 0.76 metres

Machine length for delivery: 1,83 metres

Overall Height (with rails down): 1.80 metres

Overall Height (with rails): 2.11 metres

Overall Weight: 1476 kg / may vary depending on equipment

Gradeability: 25%

Wheelbase: 1.32 metres

Ground Clearence: 0.08 metres

Power: battery

Turning radius / external: 1.55 metres

Tyres: non-marking

Use: indoor

Would you like to rent one of our machines?

Get a quote for a machine rental in just 2 minutes! 
Our colleagues will contact you within 1 working day!